15 Dec 2009

500kHz transverter boxed at last



Today I completed the 500kHz transverter by putting it in a small Maplin's ABS case with coax connectors and an on/off switch. Attached is a photo showing the transverter unit on the shack table and with the box lid open so you can see the completed unit. It has been a most enjoyable project. The schematic of the transverter is on my website on the "Operating on 500kHz" page.

On WSPR, I'm still awaiting my 50th unique report that I hope will come in the next few days before I take down the 500kHz antenna and reinstall my 28MHz halo.

No comments: