Showing posts with label 2m AM. Show all posts
Showing posts with label 2m AM. Show all posts

21 Jan 2015

AM and UK Band Plans

Because of my poor voice (as a result of my cerebellum brain bleed) I tend to use digital techniques, like WSPR and JT65, but I still enjoy AM.  Like many, I've worked transatlantic AMers on 29-29.1MHz with real QRP and simple antennas using AM. It makes a great change from SSB.

One could be forgiven for thinking AM is a dirty word at the RSGB.  In UK Band Plans published in the February 2015 edition of RadCom, AM gets no mention on 28MHz and 50MHz and gets a (begrudging) comment as a footnote only in the 144MHz Band Plan when other modes get "centres of activity" mentions. AM is alive and well in the 29-29.1MHz sub-band. AM on the 144MHz (2m) band here in the UK can be found on and around 144.550MHz. There has been AM on 29-29.1MHz for years and years and years - in fact almost as long as I've been active on the air. Yes, this is in the all-mode section, but why not say this is the 28MHz (10m) AM sub-band? Also, why are 144MHz AM users asked to "consider adjacent channel activity"? AM should easily fit in 6kHz!!

Yet again, AM is being treated as a dirty and outdated mode. Here in the UK, ex-PMR AM rigs ripe for use on VHF can be picked up for virtually nothing and there is certainly room for AM on all bands from 28MHz upwards. AM has its enthusiasts on other bands too, but yet again the RSGB seems keen to kill off this mode. Why I wonder?

Allegedly, a RadCom article on digital TV in the 146-147MHz band was pulled last month at the last minute because "someone at the RSGB" thought it would not fit in the new band! Sometimes one wonders. Maybe the day when I only get SPRAT is closer than I thought? Thankfully, there are many good articles in RadCom.

16 Jan 2013

Band Plans and AM - Feb 2013 RadCom

In the new February RadCom that just dropped on my mat at lunchtime there is a copy of the band plans for all bands from 136kHz to 134GHz.  What I fail to understand is why does the RSGB appear so anti-AM?

For many years now there has been a clear choice for an AM centre of activity on 144.55MHz. The RSGB has been made aware of this on many occasions and yet still we have a (begrudging) footnote, just about visible if you look hard, saying this is where to look. Even this comment ends with, "although this frequency is not officially recognised within the 2m band plan". Why not? We have a FAX calling frequency listed and goodness knows how many DV Internet Voice Gateway frequencies listed, yet we cannot be allowed an official AM centre of activity properly listed! AM is not a common mode these days, but those who enjoy the mode need to know where to meet on the band. The RSGB is giving no help at all here.

I also get frustrated with the 10m band plan where AM is again almost treated as a disease. Most AM activity has been in the 29.0-29.1MHz segment for years now: this is THE part of the band where AM users congregate, yet the all-mode section with up to 6kHz bandwidth does not start until 29.1MHz upwards! Does no-one who creates these band plans actually listen to see what actually goes on? In the last 30 years I have had many AM contacts on 10m and not one outside 29.0 - 29.1MHz.

So, next time you consider the band plans, please:

(a) Add an AM "centre of activity" frequency into the 2m band plan - it is 144.550MHz in case you don't know.
(b) Show 29-29.1MHz as the AM sub-band in the 10m band plan.

25 Nov 2012

A 2m AM calling frequency

At the recent RSGB Spectrum Forum Meeting (Nov 3rd 2012) the ongoing matter of an AM calling/working frequency was raised. At issue is why our national society, which is there to help and support ordinary experimenters like you or I, seems to be totally against putting a 2m AM frequency properly in the UK band plan. 144.55MHz is the frequency of choice.

This is what appeared in the minutes:
"7.7 G-QRP
Report accepted

Listing of an AM centre of activity frequency in the Band Plans
It was noted that this has been raised previously with no success. It was suggested that a “custom and practice” approach would be the only way of moving forward i.e. identify a frequency, use it and make it known."
Excuse me dear Spectrum Forum members, but this is stupid!  You have centre frequencies for all manner of other modes, but not AM. So, why not just print these words in the bandplan? :-

144.55MHz   AM calling frequency and centre of AM activity

I am not one to get easily irritated, but the RSGB stance on 2m AM is beyond belief.

16 Apr 2012

My old 2m AM rig

This morning, whilst clearing out some paperwork I came across this old B&W photo showing my 2m AM transceiver from the mid 1970s. It had a tunable RX covering 144-146MHz using a free-running VHF VFO (perfectly fine for AM use) and a crystal controlled transmitter; if I recall correctly, it had a few crystals that could be switched. The TX put out around 500mW of AM and was based on the PF2AM transmitter by Pye Telecom, a project I was involved with at the time. It was built in an aluminium box covered in wood effect Fablon.

The rig was also used for CW, goodness knows how, by having an external BFO held near the rig to demodulate a CW signal. Drift was a major issue on CW as you can imagine! Using this Heath Robinson arrangement I had a weekly sked with G5UM some 80km away every Monday night for several months and regularly received 559 using an HB9CV antenna in the loft.

The rig worked some useful AM DX across the UK with the best DX from home being a station in northern France one evening but it was really used as a local natter box in the Cambridge area.

When the ubiquitous Liner-2 2m SSB rig appeared I managed to buy a second hand one and this homemade AM rig was abandoned. I cannot remember what happened to it. It is nowhere to be found, so was probably taken apart for bits, which was a pity. Today I still use 2m AM from time to time and it remains a perfectly acceptable mode for local contacts with very simple kit.

23 Jul 2009

SixBox (6m) and FredBox (2m) - /P tests

This evening I managed 16kms contacts with both the SixBox 6m 40mW AM transceiver and with the Fredbox 2m 10mW AM transceiver. QSOs were from Aldreth, Cambs, to Swaffham Prior.

Signals from the SixBox were copied by Andrew G6ALB when I was TXing with a 6m 1/4 wave antenna on a magmount on the car roof. On the superregen RX there was solid copy of G6ALB's 6m AM signal. Andrew uses a Diamond V2000 vertical, which recent discussions have confirmed are NOT as effective as a true 1/2 wave vertical on 6m. Clearly if Andrew had even a 2 el beam the QSO would have been a very decent one.

After finishing on 6m QRP, we moved to 2m AM to try some tests with the 2m Fredbox. A solid QSO was quickly achieved with the 10mW Fredbox using the 6m 1/4 wave antenna on the car magmount. This acts as a 3/4 wave antenna on 2m. I then tried the same antenna on the Fredbox handheld. Again, a solid 2-way QSO at 16kms distance. Switching over to a 1/4 wave whip on the handheld Fredbox resulted in a weaker, but just usable signal and QSO (same signal level as on the 6m SixBox). Finally, I tried the Fredbox handheld with a small helical antenna. Although Andrew could just detect this, no real QSO was possible.

So, with the V2000 in use at the far end of the contact, 40mW AM on 6m was not as strong as 10mW AM on 2m. Notheless, it was fun to give both rigs a portable outing and make some contacts.

The picture shows me during the Fredbox QSO using the 3/4 wave whip on the Fredbox.

29 Jan 2009

VHF AM Yahoo group

This is a picture of G4BYE's version of my own Fredbox 2m AM transceiver design - a neat unit his is complete with proper PCB.

Many blog readers are already members of the Yahoo VHFam group. To join visit http://groups.yahoo.com/group/VHFam/ and follow the joining instructions.

At last VHF AM operation has got a mention in the latest UK VHF bandplans with the agreed "centre of AM activity" being notified in the footnotes as 144.55MHz. This spot in the European all-modes area is also used by some other users - I hear SSTV here sometimes - so it is NOT an exclusive spot, rather somewhere to look for 2m AM activity in the first instance. There's some AM activity on 145.8 still in Scotland but it would be good if users there would move to 144.55 so this became a UK-wide spot on which AM activity is likely to be found. Users can also be found on 70.26MHz on 4m.

VHF AM gear can be very simple to make and AM is an ideal mode for QRP building and experimenting. There's plenty of ex-PMR AM gear still to be found for next to nothing, ripe for use on 2m/4m AM.

19 Jan 2009

2m AM now on the RSGB band plan

At last 2m AM gets a mention in the bandplan as published in the Feb 2009 edition of RadCom. Sadly not as the 144.55MHz "centre of activity" on the 2m chart, but rather as a comment in the footnotes.

Still this is better than nothing and people interested in 2m AM now know that 144.55MHz is the place of preference to centre AM operations. There is still interest in 2m AM as (a) simple gear is easy to build and (b) there is a lot of surplus ex-PMR AM gear around going for almost nothing. Also it is interesting to compare AM and FM as part of self-training.

It would be good if the AMers in GM-land would migrate off 145.8 down to 144.55 now so that all AM in the UK was on/around one common frequency.