Showing posts with label WSPR-15. Show all posts
Showing posts with label WSPR-15. Show all posts

18 Jan 2013

Mixed results with WSPR-X and WSPR-15

The new version of WSPR works well with plenty of reports given and received on 472kHz with it over the last 12 hours using the 2 minute version (as before but now with a waterfall and better interface), but mixed results on the slower 15 minute slot WSPR-15 which can detect much weaker signals.

My problem is TX drift over a long 15 minute transmission. My small 10W transverter is in a tiny plastic box. When using a 2 minute transmission the PA barely gets warm so there is little heat transferred to the crystal oscillator. With the much longer TX burst the PA warms more and the crystal warms up several degrees, moving the oscillator frequency by some 10s of Hz. So, although I was able to copy signals in WSPR-15, I was not able to be detected by others overnight. There are also far fewer stations monitoring yet on WSPR-15.

The solution is to rebuild the transverter into a bigger (metal) box with (a) better heatsinking so the heat rise with a mismatch is lower, (b) a slightly more efficient PA - problem here is with weather changes the antenna match goes off optimum sometimes and the heat rises as it the PA becomes less class E, and (c) put the conversion frequency oscillator physically further away from the PA, currently it is less than 10cm.

If I fix these issues and am sure that I transmit a more stable signal in the narrower (25Hz wide) WSPR-15 slot then I have a better chance of succeeding with the more sensitive version.  With another 7-9dB S/N detection improvement, my signal could reach some of the more distant stations like TF3HZ.

17 Jan 2013

WSPR-X and WSPR-15

A note from Joe Taylor K1JT informing us about a new version of WSPR.
WSPR-X and WSPR-15
Wed Jan 16, 2013 8:23 pm
Some of you may be interested in trying WSPR-X, a new version of WSPR that includes the slow mode WSPR-15. WSPR-15 uses 15-minute T/R sequences, rather than the standard 2-minute sequences; at MF and LF it is 9 dB more sensitive than WSPR-2, decoding signals as weak as -37 dB in the standard 2500 Hz reference bandwidth. WSPR-15 is not recommended for use at HF: the tone spacing is only 0.183 Hz, less than the Doppler spreading typical of many HF paths. The main intended application for WSPR-15 is for very difficult paths at 137 kHz and the new 472 kHz band. It may be interesting to try on 160 meters, as well. Note that the recommended WSPR-15 sub-band is a 25 Hz slice just above the 200-Hz WSPR-2 sub-band, i.e., 1600-1625 Hz above the standard "dial Frequency". This will be handled automatically if you set up WSPR-X in the normal way.

A brief online User's Guide for WSPR-X is posted at
http://www.physics.princeton.edu/pulsar/K1JT/WSPR-X_Users_Guide.pdf ,
and the Windows installation file is posted at
http://physics.princeton.edu/pulsar/K1JT/WSPRX_07r2948.exe .

At present, WSPR-X does not support I/Q audio (for use with direct conversion receivers and transceivers) and does not do “band hopping”. Otherwise most familiar WSPR features are present and working well.

For software enthusiasts: Unlike older versions of WSPR, the user interface of WSPR-X is written in C++ and the Qt programming framework. My expectation is that this shift will make for easier development and program maintenance in the future. At present a click-to-install package is available only for Windows. Source code for WSPR-X is available from the open-source SVN repository at berlios.de. Anonymous checkout of the full WSPR-X source code can be accomplished with the command svn co svn://svn.berlios.de/wsjt/branches/wsprx

User comments, suggestions, and bug reports will be very welcome!

-- 73, Joe, K1JT